|
Dulok Double Wire panel system
 The Dulok Double Wire panel system has been developed by CLD to meet the latest requirements for perimeter fencing or situations of high impact, such as ball courts, school playgrounds etc.
Description
The Dulok Double Wire panel system has been used in many applications where security, anti- cut-through fencing is specified, such as school perimeters and full-size (102 x 63 m) football grounds, where up to 5.0 m high fencing may be required, and also multi-purpose games areas.
Finish
Hot dip galvanised only or hot dips galvanised and polyester powder coated. The standard colour is Green RAL 6005. RAL range of colours available
Dimensions
Heights: 630, 830, 1030, 1830, 2030, 2430, 2860 3060, 3460, 3660, 3860, 4060, 4460, 4860 mm
Panel length: 2506 mm
Mesh size: 200 x 50 mm
Wire diameter: 6 mm (Verticals) 2 x 8 mm (Horizontals) (also available in 2 x 6 mm)
Top edge projection: 30 mm (Can be inverted to give flush edge)
Notes: Fence heights above 2.43 m are made up of 2 or more panels.
 Specification clauses
To be read with Preliminaries/General conditions
Open mesh steel panel general purpose fencing/gates
· Manufacturer & Ref: CLD Dulock Double Wire Panel System, Supplies,
· Height: ……* Normal height: ……* Mesh & wire: 200 x 50 mm mesh; two 8 mm horizontal wires, one 6 mm vertical wire, hot dip galvanised and polyester powder-coated to minimum 180 microns.
· Posts: …… x …… mm RHS, hot dip galvanised after manufacture and polyester powder-coated with 40 x 5 mm flat clamp bars hot dip galvanised and polyester-coated to match post.
· Fixings: M8 x 40 mm stainless pin hex dome-head security screws.
· Maximum post centres: 2.5 m.
· Set posts: Set posts in holes 300 mm diameter x750 mm deep filled not less than half the depth with concrete, as clause 620.
· Bottom of fencing to be: approx. 50 mm above final ground level.
· Other requirements: PPC Colour Green RAL 6005 or hot dip galvanised only.
· Sheardrive ™ fixing if required instead of pin hex.
|
